How long do you cook thin hamburgers on the grill?

Contents show

Roll into 5 1/2-inch patties, about 1/3 inch thick, with a rolling pin. Heat a griddle or 2 large cast-iron skillets over medium-high. Season both sides of patties with salt and pepper. Cook patties, pressing with a spatula, 3 minutes.

How do you cook thin burgers on the grill?

The key to cooking a thin, modestly sized burger on the grill is to use the highest heat possible, and to cook the meat most of the way through on one side before flipping it and briefly cooking the second side. This technique allows you to get a nice dark crust on that first side without the risk of overcooking.

How long do you grill a 1 inch burger?

Here’s a guide for the cook time and temperature of one-inch-thick burger patties:

  1. Medium-rare (warm, red center): 6 minutes, or 130 to 135°
  2. Medium (warm, pink center): 7 to 8 minutes, or 140 to 145°
  3. Medium-well (hot, slightly pink center): 9 minutes, or 150 to 155°

How do you grill a 1/2 inch burger?

How Long to Grill Burgers

  1. For rare burgers, cook for 4 minutes total (125°F)
  2. For medium-rare burgers, cook for 5 minutes total (135°F)
  3. For medium burgers, cook for 6 to 7 minutes total (145°F)
  4. For well-done burgers, cook for 8 to 9 minutes total (160 °F)

How long do you grill burgers on each side?

For a well-done burger, grill for 7 minutes per side. For a medium-well burger, grill for 6 minutes per side. For a medium burger, grill for 5 minutes per side. For a medium-rare burger, grill for 4 minutes per side.

How do you make thin hamburger patties?

Roll into 5 1/2-inch patties, about 1/3 inch thick, with a rolling pin. Heat a griddle or 2 large cast-iron skillets over medium-high. Season both sides of patties with salt and pepper. Cook patties, pressing with a spatula, 3 minutes.

How do you make a thin hamburger?

If you try to create thin, fast food style patties before you place it in the skillet they are likely to fall apart on you and be hard to work with. To flatten the patty, use a stiff spatula (metal works well) and press firmly all across the patty until it forms an even disc roughly ¼” thick.

How long do you cook a half inch burger?

For example, when grilling a 1/2-inch frozen hamburger patty, it may take 12 minutes to cook to medium doneness — but check for doneness at about 10 minutes. When grilling a 1-inch frozen hamburger patty, it may take 20 minutes, but check for doneness a few minutes early to avoid overcooking your meat.

How do you tell if a burger is done without cutting it?

To see if your burger is ready, just plunge the thermometer into the center of the burger. We suggest putting the thermometer into the side of the burger—that way it’s less likely to go all the way through the meat, and give you a false reading. At 120°F, the burger is rare. At 130°F, it’s medium-rare.

THIS IS INTERESTING:  Are glass baking dishes non stick?

How hot should a grill be to cook burgers?

Grill temp for burgers

When grilling burgers, you want the grill temperature to be around medium-high to high heat, which is around 375 to 400 degrees F. Many gas grills have built in thermometers, but often they tend to be not super reliable.

Do you close the grill when cooking burgers?

When to Leave the Grill Open. If you’re grilling quick-cooking foods such as burgers, thin steaks, chops, fish, shrimp, or sliced vegetables directly over the flames, you can leave the grill open. For red meat, that means you won’t lose that pink, juicy center so many of us love.

How do you grill burgers on a propane grill?

Grill the burgers:

  1. Turn the propane on, then ignite the burners to high heat.
  2. Close the lid and heat the grill until it reaches about 400 degrees.
  3. While the grill heats, form (4) 1/4 pound burger patties into an even 1/2″ thickness.
  4. Close the lid and cook until the burgers reach the desired doneness.

How do you know when to flip a burger?

Sear the burgers directly over the coals until brown and crispy on the bottom, about four to five minutes. You’ll know to flip the patties when you see liquid pooling on the uncooked surface.

How long do you grill an 8 ounce burger?

Place the burgers on the grill grate and cook, waiting for at least 4 minutes before flipping. Cook until both sides are browned and the burger is cooked to the desired doneness, about 10 minutes total for medium-rare, 8-ounce burgers.

What do you Season burgers with?

The Best Burger Seasoning is Kosher Salt

As with all meats, coarse salt, or kosher salt, is the best bet for seasoning ground beef. The large granules allow for the most control and deliver on the promise of enhancing the flavor of the final burger. Plan for about 3/4 teaspoon coarse salt per pound of ground beef.

How do you keep burgers thin?

Solution: “Flatten the patties by pressing them flat using a burger press. If you don’t have a burger press, then try pressing together two plates or two cutting boards to get that flat burger form.

Why are smash burgers so good?

Minced chuck steak is gold for Smash Burger. Secondly, it’s the smash that really makes it. When you smash the burgers down on a super-hot grill, the fat has nowhere to go but back up into the burger patty meaning you’re essentially cooking your burger in its own beefy juices.

How do you keep burgers from shrinking on the grill?

  • Choose leaner meats with no added water.
  • Cook it slow, on a low temperature.
  • If you’re cooking burgers on the grill, don’t close the lid.
  • Form the patties wider than you’d like them to be, and create a small dimple in the center by pressing down with your fingers.
  • How do you keep burgers moist on the grill?

    If you want a juicy hamburger, it helps to restore some of that lost moisture. The easiest way is to add water or some other liquid to the burger mixture. We’ve found that 2 to 3 tablespoons of ice-cold water mixed into a pound of ground beef greatly increases the juiciness of grilled burgers.

    How do you make thin hamburger patties Reddit?

    While the indentation-in-the-center trick works well, I’ve found this gem too:

    1. Form beef balls the size of golf balls (it’ll be 2oz beef or so)
    2. Slap them on wax paper or foil.
    3. Squish them into patties.
    4. Cover with another foil piece.
    5. Freeze for about an hour.
    6. Slap them on the grill/frying pan for 3 min each side.

    How long do you grill 6 oz burgers?

    This makes each burger approximately 6 oz. The USDA recommends cooking beef to a minimum internal temperature of 145 degrees.

    Fresh Beef Burger Grill Times.

    Doneness First Side Time Second Side Time
    Medium-Rare 3 minutes 4 minutes
    Medium 3 minutes 5 minutes
    Medium-Well 4 minutes 5 minutes
    Well Done 4 minutes 6 minutes

    How do you grill a 1/3 pound burger?

    Instructions Divide ground beef into 4 (½-pound) or 6 (1/3-pound) portions. Heat the grill to high (gas or charcoal); 375-400 degrees F. Flip and cook an additional 2-3 minutes for rare, 4-5 for medium-rare or 6-7 for medium doneness as measured with an Instant Read thermometer. Remove and allow to rest 5 minutes.

    Is a little pink in burgers OK?

    Answer: Yes, a cooked burger that’s pink on the inside can be safe to eat — but only if the meat’s internal temperature has reached 160°F throughout. As the U.S. Department of Agriculture points out, it’s not at all unusual for hamburgers to remain pink inside after they’ve been safely cooked.

    How many times do you flip a burger?

    Flip the Burgers Once and Only Once

    Constant turning will toughen and dry out the meat, and if you flip too soon, burgers will stick. Cook two minutes per side for rare, three minutes for medium-rare, four minutes for medium, and five minutes for well-done.

    Why is my burger bleeding?

    The blood appearing liquid in your hamburger package is actually not blood, but is myoglobin. Nearly all of the blood is drained from a carcass within the first few minutes of the harvest process. Myoglobin is the heme-iron containing protein found in muscle that stores oxygen and gives meat its color.

    THIS IS INTERESTING:  Does lamb shoulder take longer to cook than leg?

    Do you grill burgers on direct or indirect heat?

    Place each burger on the direct heat side of the grill. Do not press down on the patties. Cook until deep golden brown on the first side, 3 to 5 minutes.

    Should you grill burgers on high heat?

    How hot should the grill be for burgers? For burgers the optimal grilling temperature rule is – the hotter the better. Heat your grill to medium high heat (between 350-400°F).

    Is it better to grill burgers with the lid open or closed?

    Cut of meat

    Thin pork chops, shrimp, and burgers tend to cook quickly. Leaving the grill lid up will slow the cooking process by reducing the temperature around the meat. For thicker cuts, you want to close the lid to keep the temperature high and even.

    Should I cook burgers on the grill with the lid open or closed?

    It’s simple. If the food you’re grilling is ¾ inch thick or less, don’t put the lid down. If it’s over ¾ inch—you guessed it—cover that sucker up.

    How can you tell if a burger is done without a thermometer?

    Go in at an angle in the middle of the cut, wait for a second, and then touch the tester to your wrist. If it’s cold, the meat is raw. If it’s warm—close to your body temperature—then the meat is medium rare. If it’s hot, it’s well done.

    Should you press down on burgers?

    4. No squishing, please. Nothing’s more luscious than a fat, juicy burger that dribbles down your chin. Avoid the urge to press down on your burger while it cooks as you’ll force out the juices — and the flavor along with them.

    How long do you cook a 4 oz burger?

    In general, a typical 4-ounce burger or quarter-pounder will take 3 to 4 minutes per side to reach medium doneness. That’s 6 to 8 minutes in total. By inserting an instant-read thermometer into the center of the burger, you can confirm it has reached your desired doneness against the grill time chart below.

    Is a medium well burger safe?

    Though any temperature under 160 F/71 C or 165 F/ 74 C for ground poultry—is not considered safe for ground meat, here is a list of cooking times for varying degrees of doneness for burgers: Rare: 120 to 125. Medium Rare: 130 to 135. Medium Well: 150 to 155.

    How long does it take to grill a well done burger?

    Medium well: Cook patty on one side for three minutes. Turn it over and cook for an additional six minutes. Well done: Cook patty on one side for three minutes. Turn it over and cook for an additional seven minutes.

    Do you season both sides of burger?

    That said, don’t skimp on the salt and pepper. Season one side of the patty with salt and pepper right before you place it on the grill, seasoned side down. Before you flip the burger, season the other side. Think gentle when forming your burgers; now is definitely not the time to be heavy-handed.

    Should you mix seasoning into burger meat?

    AND SO: Your burgers aren’t tender.

    So for the best burgers, don’t do ANYTHING to it before you shape the meat it into patties. Don’t dump it in a bowl to add seasoning — not even salt and pepper — and mix it around. That includes adding anything other than salt and pepper, like eggs, onions, or herbs.

    How can I make my burgers taste better?

    The herbs and spices that make a good complement to beef burgers are parsley, basil, thyme, oregano, marjoram, savory, garlic, and chili flakes or powder. For intensifying flavor, try using dill pickles, sweet relish, capers, anchovies or chutney, plus almost any cheese will serve a beef burger well.

    Should you put egg in hamburger patties?

    No, homemade burgers don’t need eggs to bind them. Other ground beef recipes like these low carb meatballs need eggs to help bind the ingredients because they have additional dry ingredients like bread crumbs and onions. Using this recipe to make beef burgers does not require any eggs.

    Why do my hamburgers fall apart when I cook them?

    The first reason is that it will simply take longer to cook through. Secondly, the burger may not cook evenly because side of the patty that’s touching the grill will likely cook while the other side is still thawing out. Of course you’ll be flipping it over, but now the top is perfect, but you’re cooking the bottom.

    Why are my hamburger patties falling apart?

    Don’t make a hamburger without quality beef at hand. Should you use meat with too little fat content, your burger would crumble. Fats provide the necessary moisture and taste to the patty that will otherwise dehydrate on the grill and break apart. The ideal fat value is 20 percent, but 15 percent can work too.

    Why do you put an ice cube on a burger when grilling?

    The ice cube will prevent the burgers from overcooking and add a bit of extra moisture to the beef — something that’s especially helpful if you’re grilling rather large patties. What you’re gonna do is take a ball of ground beef, gently press a little ice cube in the center, and form the beef around it so it’s sealed.

    THIS IS INTERESTING:  Do you put a lid on stir fry?

    Why put a thumbprint in a burger?

    Thumbprint for Even Cooking

    To ensure that the meat cooks evenly, make a thumbprint indentation into each patty before it goes on the grill. The indentation helps the patty hold its shape—rather than swelling—as it shrinks during cooking.

    How thick should burger patties be?

    Grab 5 to 6 ounces of meat and lightly toss from hand to hand, forming a ball. The patty should be at least as wide as your bun and about 3/4 to 1 inch thick. Make a divot in the middle of the burger with your thumb to help it keep its shape while cooking. These patties can be made ahead and chilled in the fridge.

    What’s the difference between a Smashburger and a regular hamburger?

    While a basic grilled burger is great, the benefit of a smashed burger is that since you’re literally smashing the burger down, you end up with a greater surface area and more opportunity for a Maillard reaction, which means more flavor.

    How do you smash a burger without a press?

    But what if, for one reason or another, you don’t have one? If you don’t have a spatula, you can pre-smash your burgers instead. Place them between two sheets of wax paper or plastic wrap on your cutting board and flatten them with the thick bottom of a heavy frying pan or pot.

    How do you make thin flat hamburger patties?

    When the pan is hot, place 2 balls (or more depending on the size of your pan) in the pan and cook until browned, about 1 to 1 ½ minutes. Using a flat, heavy, sharp spatula, flip the meat and press down firmly to smash the ball into a thin patty.

    What temperature should burgers be grilled at?

    Grill temp for burgers

    When grilling burgers, you want the grill temperature to be around medium-high to high heat, which is around 375 to 400 degrees F. Many gas grills have built in thermometers, but often they tend to be not super reliable.

    How do you cook hamburgers on the grill?

    In general, follow these total grilling times:

    1. For rare burgers, cook for 4 minutes total (125°F)
    2. For medium-rare burgers, cook for 5 minutes total (135°F)
    3. For medium burgers, cook for 6 to 7 minutes total (145°F)
    4. For well-done burgers, cook for 8 to 9 minutes total (160 °F)

    Why are my grilled burgers dry?

    If you’re making burgers from scratch, you may have run into this issue before, but fortunately it’s easy to avoid. According to Eat This, Not That, the main reason burgers dry out is simply that they’re overcooked. This typically occurs when you cook the patties straight out of the fridge, or worse, the freezer.

    What makes a burger juicy?

    Making a juicy, flavorful hamburger starts with using the ideal beef-to-fat ratio. In this case, we recommend an 80/20 ratio—that’s 80% beef to 20% fat; just enough fat to make it juicy. You can use a 90/10 ratio if you like, but remember that the leaner the beef, the less flavor and juice you’ll get to enjoy later on.

    How do you grill lean burgers?

    While fattier burgers may be best cooked at a high heat, leaner burgers are best over a medium heat. If the grill is already at a high heat, you can sear the burger on both sides directly on the grill, and then move to the warming rack to let it cook through over a lower heat. Minimize flipping.

    What are thin burgers called?

    What Is A Smash Burger? Smash burgers are made using the process of placing a round ball of ground beef on a hot cast iron cooking surface and smashing it with a spatula to yield a thin beef patty. The result is a juicy thin burger with a nicely seared exterior.

    How do I keep my burgers from shrinking Reddit?

    Here’s a few quick tips to prevent them from shrinking:

    1. Choose leaner meats with no added water!!
    2. Cook it slow, on a low temperature.
    3. If you’re cooking burgers on the grill, don’t close the lid.
    4. Form the patties wider than you’d like them to be, and create a small dimple in the center by pressing down with your fingers.

    How do you grill hamburgers on a gas grill Reddit?

    Here’s how I do my burgers:

    1. 6 oz patties.
    2. medium/high heat, lid on for the duration. Dome thermometer around 500 °F.
    3. 4 minutes on the first side.
    4. 2 minutes on 2nd side, then add cheese and buns to toast.
    5. 1-2 more minutes on 2nd side, check internal temp with a Thermapen.

    Do you close the grill when cooking burgers?

    When to Leave the Grill Open. If you’re grilling quick-cooking foods such as burgers, thin steaks, chops, fish, shrimp, or sliced vegetables directly over the flames, you can leave the grill open. For red meat, that means you won’t lose that pink, juicy center so many of us love.

    How long do you grill an 8 ounce burger?

    Place the burgers on the grill grate and cook, waiting for at least 4 minutes before flipping. Cook until both sides are browned and the burger is cooked to the desired doneness, about 10 minutes total for medium-rare, 8-ounce burgers.